Rack Roll Forming Machine Half seams type Looper includes decoiler, guide frame, lever/feeding section, continuous bottom hole punching section, forming section, positioningand cutting section, collection table and electrical control system etc.
Equipment capacity:
1. Equipment production capacity: width≤400mm, thickness of steel material: 1-2.5mm
2. Production speed: 8-15m/min
3. Total power: about 21.5kw
Technical Parameters:
Item | Unit | Parameter | Note | ||
1 | Raw material specification | Type | Q235 | ||
Type | MPa | 500 | |||
Thickness | mm | 1.5~3.5 | |||
Internal diameter of the coil stock | mm | 508 | |||
Weight | T | 3 | |||
2 | Width of the panel | mm | 500 | ||
3 | Production speed | m/min | 10-30 | ||
4 | Roll material | Cr12 | |||
5 | Roll drive | Gear Box | |||
7 | Main motor | Kw | 75 | ||
8 | Electrical control system | PLC Automatic Control System |
Leveling system.
The coil from Decoiler is a little bit curves, so the leveling system is to help make the coil straight, neat and clear. We will take 7 rollers, upper three rollers and down four rollers to level the coil.
Leveling roller diameter: 80mm, made from
Leveling roller material: 45# steel after 62 to 65 degree quenching.
Frame: Middle plate
Frame thickness: 20mm